We apologize for the inconvenience but the job you are looking for has been filled or it has been removed by the recruiter. For your reference, the original listing is shown at the bottom of this page.
Listed below are the top 10 out of 4,197 listings that are in the same industry and location as the job you were looking for. To see more than 10 listings, click here to search similar jobs in US
Since 1980, DISH Network is the ideal workplace for people with adventurous spirit and creativity, who are smart risk takers and aggressive winners all those ...
Description LOOKING FOR A COMPANY THAT VALUES YOUR POTENTIAL? A job with AT T as a Premises Technician can provide you with exactly that! Take advantage of ...
Bachelor degree preferred. Minimum Associated degree is required. Minimum 2years of experience plus electronics training in one or more of the following fields: ...
Minimum Associate's degree, twoyear technical degree, relevant military experience, equivalent special electronics training, or equivalent work experience ...
The following opportunity is available in Philadelphia, PA. Upon submitting your resume, please indicate your desire for this PartTime opportunity. Part Time ...
The following opportunity is available in our Salinas, CA office. Upon submitting your resume, please indicate your desire for this On Call opportunity. Below ...
Mechanical Technician will support MQ8B Fire Scout at NAS Webster Field. Responsibilities include: Troubleshooting general problems on the MQ8B and resolving ...
Avionics Technician will support MQ8B Fire Scout . Responsibilities include: Troubleshooting general problems on the MQ8B and resolving specific problems ...
**This position requires an ACTIVE SECRET level security clearance to even be considered. If you do NOT possess at least that first requirement, PLEASE DO NOT ...
For your reference, we have included the original job posting below.
Electronic Calibration Technician C
Job Number:
25937356
Company Name:
Simco Electronics
Job Location:
US
Job Category:
Information Technology
Electronic Calibration Technician C
id="tms_job_Dayton cal c">Electronic Calibration Technician C
Job Code :Dayton cal c Location :OH Dayton US 45390
% of Travel Required :10-20% Job Type :Full Time Career Level :Experienced (Non-Manager) Education :Vocational Skill :Engineering ->Mechanical Integrity, Maintenance, Leak detection, Instrument, Electrical Administrative Support ->Department Level
Category :Biotechnology and Pharmaceutical, Computers, Hardware, Installation, Maintenance, and Repair, Aerospace/Aviation/Defense, Computers, Software, Electronics Job Description :
Seize the opportunity.................... Calibration Technician CSIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. SIMCO Electronics is headquartered in Sunnyvale, CA. With a worldwide network of laboratories and international field service teams providing localized support. SIMCO Electronics strategic emphasis is to provide enhanced program management systems and services for customers’ test and measurement equipment needs.
One global service provider improves quality control and compliance of services while reducing total program principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics’ competencies and a central focus of capital investments and strategic initiatives.
As our Calibration Technician, you will perform mechanical calibrations and/or repairs on general purpose and/or specialized measuring and test equipment. Including but not limited to bio-med instrumentation, dimensional inspection, fixed gauging, flow – pneumatic/gases, force (compression and tension) and torque, linear and angular measurement, mass weights and measurement, mechanical standards, pipette calibration and repair, pressure and vacuum, rotary motion, temperature and humidity and other repairs. You will receive general instructions on routine work, detailed instructions on new assignments,
We are seeking candidates that act on important opportunities as they arise and are willing to act with a minimum of planning;
If you can translate ideas into action, we are looking for you.
If you are a person who does not hesitate to pursue a sound, innovative idea; you work quickly and are enthusiastic about assignments, please apply.
If you encourage your colleagues to also be excited about their work and act ethically and honestly, please apply.
If you strive to excel, we want to talk with you!
Good communication skills are required as you will be communicating SCP status to non-technical personnel; you will also regularly interact with other technicians, CSRs and purchasing; There will also be times when you will interact with customers; interaction normally involves exchange or presentation of factual information.
Qualifications General Education and Training - HS Diploma or equivalent, with Algebra; 1 yr calibration experience- hand tool calibration;
Physical Demands:
Must be able to lift up to 45 pounds without assistance; occasional standing and bending are required.
Working Environment :
Works primarily in a laboratory or manufacturing environment at a SIMCO location and or customer sites; travel may be required to other domestic and possibly international locations.
DESIRED EXPERIENCE • TMDE/PMEL certified or Associates degree in Electrical Technologies• Minimum of 2 years calibration experience• Strong knowledge of electronic circuit theory• Power and hand tools• Must be able to lift up to 65 pounds without assistance; occasional standing and bending required. This is a team atmosphere primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, and the position could require some travel. This is a regular full time position. Job Requirements : The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations.
Responsibilites
1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications 2. Maintain primary and/or intrinsic calibration standards 3. Maintain secondary and/or working calibration standards 4. Perform maintenance, troubleshooting and repair of precision equipment 5. Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements 6. Collect, compile, measure, summarize, and record data gathered during calibration. 7. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc 8. Identify and correct measurement errors, as applicable 9. Prepare calibration reports and certificates 10. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used 11. Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes 12. Train subordinates in calibration concepts and procedures 13. Interact with other technicians, Customer Service Representatives, Account Managers, and customers 14. Other duties and responsibilities as may be assigned
Qualifications
1. Minimum High School diploma or equivalent 2. Must be able to perform general math and algebra functions 3. Understanding of Basic Statistics 4. Must possess good written and oral, communication skills 5. Technical writing ability 6. Intermediate ability to troubleshoot repair, align and optimize precision equipment 7. Intermediate computer skills 8. Proficient in use of MS Word and Excel 9. Minimum three years of calibration experience some of which can be offset with formal metrology training 10. Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) 11. Must have great interpersonal and customer service skills 12. Strong attention to details 13. Must be a self motivator, work as a team player, and follow written procedures
Physical Demands
1. Must be able to lift up to 45 pounds without assistance 2. occasional standing and bending are required
Working Environment
1. Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites
2. Travel may be required to other domestic and possibly international locations Offer Relocation :Yes Shift/Hours :First Shift (Day) Recruiter Contact Information :Deb
